Repeat Meter
[ Stock No：216 ]
- Measurement of Surface Plate Flatness, Straightness etc can be done easily.
- At 3 points of the fulcrum interval 100mm, flat surface unevenness is measured
- Before measurement, perform zero setting on the master surface plate.
*Dial Gauge is sold separately.
Main Equipment
| Code No. | Nominal Measurement | Measurement (L×W×H mm) |
Measurement Pitch (mm) |
Mass (kg) |
|---|---|---|---|---|
| CB101 | 200 | 240×60×90 | 100 | 4.5 |
Master Surface Plate
| Code No. | Nominal Measurement | Measurement (L×W×H mm) |
Flatness (μm) |
Mass (kg) |
|---|---|---|---|---|
| CB102 | 300 | 300×75×150 | 1 | 10 |
