Bench Centers (CV-Type)
[ Stock No：313 ]
- Tester with V Block (V Width 16mm) attached to stock.
- Can be used for measurement of shafts, etc with center hole, or without hole
- On the dial gauge stand, a lever type dial gauge is installed.
- Center entry/exit can be performed by a one touch lever.
*Dial gauge and test bar are not included.
| Code No. | Model | Full Lenght (Lmm) |
Center Distance (mm) |
Effective Center Height (mm) |
Use Center | Height Parallelism (μm) |
Mass (kg) |
|---|---|---|---|---|---|---|---|
| SCV101 | CV-1 | 530 | 300 | 75 | MT-1 | 5 | 14 |
