Sine Base
[ Stock No：316 ]
- Designed for stability.
- It is possible to detach the base and use the upper surface only.
- lapping finishing and entirely hardened
- Please use a block gauge to set the Angle.
| Code No. | Nominal Measurement |
Measurement (L×W×Hmm) |
Upper Surface Measurement (L×Wmm) |
Inclination Angle (degrees) | Roller Center Distance (mm) |
Parallelisms (μm) |
Mass (kg) |
|---|---|---|---|---|---|---|---|
| NG101 | 100 | 130×70×62 | 115×70 | 0 – 50 | 100±0.002 | 2 | 3.5 |
| NG102 | 200 | 240×100×70 | 222×100 | 0 – 50 | 200±0.003 | 3 | 10.5 |
