System Outline
On the standard specification of this equipment, in addition to the representative flat gear, spiral gear, internal gear, and bevel gear inspection is possible. (Optionally hypoid gear is also possible)
acoustic testing, tooth contact testing, both teeth surface mating testing, inspection items are also possible.
Also, for high accuracy measurement, we are using granite material for the measurement base.
Specification Outline
| Power | AC200V 1KVA |
| Load Break | can be set to any load using a dial. |
| Target Work | MAX diameter250mm MAX weight 10kg (including jigs) |
| Axis Interval Distance | Parallel Axis : -5 – 255mm Intersecting Axis, Drive side : 127.5 – 290mm Passive side : 0 – 127.5mm |
| Axis Angle | 0 – 360deg., Can be set to any position. (30 seconds Unit set) |
| No. of Revolutions | 0 – 2500rpm Nonstep Setting : Normal/Reverse Possible |
| Required floor space | 1700(W)×900(D)mm |
*This equipment is developed and marketed under technical agreement with Nagaoka Gear Works Co Ltd.
