Bench Centers (Standard-Type)
[ Stock No：311 ]
- Used for eccentricity and deflection Measurement of shafts, etc.
- Parallelism between table upper surface and center is assured.
- Center entry/exit is performed by one touch lever.
*According to your requirement, we can manufacture variations with carbide center or brolly center.
*Dial gauge and test bar are not included.
| Code No. | Model | Full Lenght (Lmm) |
Center Distance (mm) |
Center Height (mm) |
Use Center | Height Parallelism (μm) |
Mass (kg) |
|---|---|---|---|---|---|---|---|
| SA101 | No.-1 | 650 | 390 | 150 | MT-1 | 6 | 33 |
| SA102 | No.-2 | 1220 | 820 | 240 | MT-2 | 8 | 87 |
| SA103 | No.-3 | 1645 | 1190 | 300 | MT-3 | 10 | 135 |
| SAL101 | No.1-890L | 890 | 630 | 150 | MT-1 | 8 | 37 |
| SAH101 | No.1-300H | 650 | 400 | 300 | MT-1 | 10 | 39 |
