Level Tester
[ Stock No：500 ]
- Very convenient for Level Sensitivity, Levelness inspection and Levelness examination.
- The core interval for this equipment is 500mm. Normal Level Sensitivity id displayed in 1m. On this equipment the dial gauge reading value multiplied × 2 will be the level sensitivity.
NOTE: Level and Dial Guage are not included. They have to be provided separately.
| Code No. | Nominal | floor surface Measurement (L×W mm) |
Upper surface Measurement (L×W mm) |
Core interval Distance (mm) |
Flatness (μm) |
Mass (kg) |
|---|---|---|---|---|---|---|
| AZ101 | 500 | 623×267 | 530×60 | 500 | 10 | 20 |
NOTE
| What is Level Sensitivity | The inclination required to change the bubble chamber’s bubble graduation by 1. This means the height (Unit : mm) or Angle (Unit : seconds) in relation to base 1m.Height relations in relation to angle and base is as follows
Angle 1 seconds = 4.85μm per 1m ≈5μm per 1m
|
|
| Types of Levels | Division | Sensitivity (mm/m) |
| Type 1 | 0.02 (≈4″) | |
| Type 2 | 0.05 (≈10″) | |
| Type 3 | 0.1 (≈20″) | |
