Straightness Tester

[ Stock No:215 ]
Straightness Tester
  • On the granite standard straight edge lower surface, 3 saddle supports are attached.
  • The accuracy surface is high precision and light weight.
  • By moving the slider, straightness can easily be measured.
  • By performing Zero setting on the master surface plate, it is possible to measure the work absolute value
  • Rather than a dial gauge, by using a proble with external output, it is possible to perform data processing.

*Dial Gauge is sold separately.

Main Equipment

Code No. Nominal Measurement Measurement
(L×W×H mm)
Effective Measurement Lenght
(mm)
Straightness
(μm)
Mass
(kg)
CA101 500 640×60×125 500 2 18
CA102 1000 1140×60×125 1000 4 30

Master Surface Plate

Code No. Nominal Measurement Measurement
(L×W×H mm)
Flatness
(μm)
Mass
(kg)
CA201 500 640×125×110 1.5 25
CA202 1000 1140×125×110 3.0 44

Other products of Straightness Testers

Back to Archive

Inquiry

Head office

Tel. +81 258-22-1100

Tokyo Office

Tel. +81 3-3293-8881

Nagoya Office

Tel. +81 52-322-4031